Victron Battery Charging Upgrade Kit For Campervan, RV and Marine, Car Parts

Car Accessories

Victron Energy Camper or Marine Leisure Charging Upgrade Kit Upgrade your Leisure Vehicle or Marine Charging Capabilities Victron Energy Charging Upgrade Kit using all Victron Products Kit Includes : Blue Power IP65 Rated Charger 12v 15amp 230v Orion Tr Smart DC-DC 30amp Charger SmartSolar Charge Controller MPPT 100/30 SmartShunt IP65 rated Battery Monitor 500amp 50mV Blue Power Smart Charger 15amp 230v The Blue Smart IP65 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP65 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. The battery is charged, smartly... to perfect condition Recovery of deeply-discharged 'dead' batteries Connect the battery with ease Check the status of your battery remotely with built in Bluetooth Victron Energy Orion Smart DC-Dc Charger 12v - 12v - 30amp Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth and Galvanic Isolation For use in dual battery systems in vehicles or on boats where the (smart) alternator and the start battery are used to charge the service battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch and has an engine running detection mechanism. Smart Bluetooth Technology Efficient 30amp output Programable Charge Profiles 12v to 12v The Orion-Tr Smart charger can be used in 12V systems and is suitable for both lead acid and lithium batteries. Models are available up to 400W and unlimited multiple units can be connected in parallel to increase output power. Suitable for high temperatures up to 55°C with a full rated output up to 40°C. ORI121236120 SmartSolar Charge Controller Victron Energy MPPT 100|30 A solar charger gathers energy from your solar panels and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged. If you are not sure what size controller you need, please use this handy MPPT calculator  This is an excellent upgrade to your Current Solar Panel System. Smart Bluetooth Connectivity with Victron Connect App Ultra-fast Maximum Power Point Tracking (MPPT) Programable Charge Profiles Automatic Voltage Detection 100volt Maximum Open Circuit Voltage 30amp Maximum charge current MPPT: Ultra Fast Maximum Power Point Tracking By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage. The advantage of this is most noticeable when the sky is partially clouded, and light intensity is constantly changing. Remote Monitoring and Control Remotely control and monitor the extensive features of your SmartSolar MPPT charger with built-in Bluetooth by pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the internet with a GX device, the Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both VictronConnect and VRM are free to use. For remote installations - even when there is no internet connection nearby - you may be able to monitor your MPPT by connecting the  GlobalLink 520. Part Number SCC110030210 Victron IP65 500A / 50mV SmartShunt - Bluetooth Enabled IP65 Water Proof - ideal for Boats Alternative to BMV-712 Battery Monitor Smart Enabled Bluetooth for VictronConnect App GX Device Connectivity via VE Direct Port Smart Battery Shunt IP65 Water Proof Rating The SmartShunt is an all in one battery monitor, only without a display. Your phone acts as the display. The SmartShunt connects via Bluetooth to the VictronConnect app on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information and much more. Ideal for Monitoring batteries on your boat, or in damp conditions thanks to the IP65 rating  Alternatively the SmartShunt can be connected and be read by a GX device. Connection to the SmartShunt is made via a VE.Direct cable. The SmartShunt is a good alternative for a BMV battery monitor, especially for systems where battery monitoring is needed but less wiring and clutter is wanted.The SmartShunt is equipped with Bluetooth, a VE.Direct port and a connection that can be used for: monitoring a second battery, midpoint monitoring or a temperature sensor.

More information

More Information

Table of Contents

• Why it matters
• Features & benefits
• Key specifications
• Usage & maintenance
• Frequently Asked Questions

Why it matters

Upgrading your campervan, RV, or marine vehicle's battery charging system is essential for ensuring reliable power supply during your adventures. The Victron Battery Charging Upgrade Kit is designed to enhance your vehicle's charging capabilities, making it a valuable investment for any leisure vehicle owner.

Quick Overview

• Designed for campervans, RVs, and marine applications.
• Includes multiple high-quality Victron products.
• Enhances battery charging efficiency and longevity.
• Bluetooth connectivity for remote monitoring.

Features & benefits

The Victron Battery Charging Upgrade Kit includes several components that work together to provide a comprehensive charging solution:

Useful Details

• Blue Smart IP65 Charger: A professional battery charger with built-in Bluetooth, suitable for various vehicles. It can recover deeply discharged batteries and allows for remote monitoring.
• Orion-Tr Smart DC-DC Charger: This adaptive 3-stage charger is perfect for dual battery systems, providing efficient charging with Bluetooth connectivity for easy programming and monitoring.
• SmartSolar Charge Controller: Maximizes energy harvest from solar panels, ensuring batteries are charged quickly and efficiently. It features automatic voltage detection and can operate with low battery voltages.
• SmartShunt Battery Monitor: A Bluetooth-enabled battery monitor that provides real-time data on battery status through the VictronConnect app, making it ideal for use in damp conditions.

Practical Tips

• Ensure proper installation of all components for optimal performance.
• Regularly check the VictronConnect app for battery health and status updates.
• Utilize the programmable charge profiles to suit your specific battery type.
• Monitor your solar panel output to maximize energy efficiency.

Key Specifications

While specific technical specifications are not provided, the kit includes:

• Blue Smart IP65 Charger: 12V, 15A, 230V
• Orion-Tr Smart DC-DC Charger: 12V, 30A
• SmartSolar Charge Controller: MPPT 100/30
• SmartShunt: 500A, 50mV

Usage & maintenance

To ensure the longevity and efficiency of your Victron Battery Charging Upgrade Kit, consider the following maintenance tips:

• Regularly inspect all connections and components for wear or damage.
• Keep the devices clean and free from moisture to maintain their IP65 rating.
• Update the VictronConnect app to access the latest features and improvements.
• Follow the manufacturer's guidelines for battery care and maintenance.

Frequently Asked Questions

Here are some common questions regarding the Victron Battery Charging Upgrade Kit:

• Can I use this kit with lithium batteries?
  Yes, the Orion-Tr Smart DC-DC Charger is suitable for both lead-acid and lithium batteries.
• How do I monitor my battery status?
  You can monitor your battery status through the VictronConnect app, which connects via Bluetooth.
• Is the SmartShunt easy to install?
  Yes, the SmartShunt is designed for easy installation and can be connected with minimal wiring.
• What is the maximum charge current for the SmartSolar Charge Controller?
  The maximum charge current is 30A.
• Can I connect multiple units in parallel?
  Yes, multiple Orion-Tr Smart chargers can be connected in parallel to increase output power.