Victron Smart 140w Solar Battery Charger Kit DC-DC with Cables and Fuses | BPC121531024R, Car Parts

Car Accessories

Victron Campervan, RV, Marine and Welfare Unit Solar Power Kit Includes DC-DC and 230v Charging Capability. This Kit is Designed for installing the a Victron Charging system into your Campervan, RV, boat or Welfare Unit. Whether you are completing a new installation or upgrading an existing installation, tis kit has your covered. Includes the correct wire sizing for the DC-DC charger and Solar controller along with a 6-way Mega Fuse Board. This system is great for use on the roof racks or roof mount systems and is easily installed. What's In The Box Blue Power 230v UK Smart Charger 12v 15amp IP65 Orion-Tr Smart Charger 12v - 12v 30amp SmartSolar MPPT 75/15 140W 12v Monocrystalline Solar Panel Double Entry Solar Cable Gland Solar Corner Mount Brackets 10m Mc4 Solar Cable 6mtr 16mm Red Hi-Flex Cable 6mtr 16mm Black Hi-Flex Cable 4mtr 6mm Red Hi-Flex Cable 4mtr 6mm Black Hi-Flex Cable 6-way Mega Fuse Holder 4 x 60amp Mega Fuses 2 x 200A Mega Fuses Blue Power Smart Charger 15amp 230v The Blue Smart IP65 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP65 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. The battery is charged, smartly... to perfect condition Recovery of deeply-discharged 'dead' batteries Connect the battery with ease Check the status of your battery remotely with built in Bluetooth Victron Energy Orion Smart DC-Dc Charger 12v - 12v - 30amp Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth. with Galvanic Isolation For use in dual battery systems in vehicles or on boats where the (smart) alternator and the start battery are used to charge the service battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch and has an engine running detection mechanism. Smart Bluetooth Technology Efficient 30amp output Programable Charge Profiles 12v to 12v The Orion-Tr Smart charger can be used in 12V systems and is suitable for both lead acid and lithium batteries. Models are available up to 400W and unlimited multiple units can be connected in parallel to increase output power. Suitable for high temperatures up to 55°C with a full rated output up to 40°C. ORI121236120 Victron Solar Cable 6mmsq 10 Metre Length with MC4 Connectors Ideal for simple and quick installations  Pack Contains ONE cable with 1 male MC4 end and 1 Female MC4 end SmartSolar Charge Controller MPPT 75/15  Smart Bluetooth Connectivity with Victron Connect App Ultra-fast Maximum Power Point Tracking (MPPT) Programable Charge Profiles Load output - perfect for LED lighting Automatic Voltage Detection  75volt Maximum Open Circuit Voltage 15amp Maximum charge current The SmartSolar Controller gathers energy from your panels to store it in your battery bank. Using the latest technology, SmartSolar maximises this energy, intelligently monitoring to achieve full charge in the shortest period whilst maintaining battery longevity and health. The SmartSolar charge controller will recharge a severely depleted battery with a voltage as low as 0 Volts, provided the cells are not permanently damaged MPPT: Ultra Fast Maximum Power Point Tracking By real time monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every last amp of available power is used from your panels, and diverted for storage. The advantage of this is most noticeable when the sky cloudy, and light intensity is changing. Remote Monitoring and Control Remotely control and monitor your SmartSolar MPPT charger by pairing it with your smartphone or other device via the VictronConnect App. If your installation is connected to the internet via a GX device, the Victron Remote Management Portal (VRM) gives you access to your MPPT at anytime, anywhere in the world; both VictronConnect and VRM are free to access. For installations with no internet connection nearby - you may be able to monitor your MPPT by connecting the  GlobalLink 520. Load output The intelligent Load output function prevents running batteries 'flat'. You can configure the voltage at which SmartSolar disconnects a load, thus preventing excessive drain on your battery. The intelligent SmartSolar will attempt a 100% recharge every day. If it can't during periods of poor conditions, it raises the disconnect voltage, daily, until it achieves a full charge. We call this feature BatteryLife because it maintains the health and longevity. SCC075015060R Victron BlueSolar 140w Monocrystaline Solar Panel BlueSolar Panels by Victron Energy, a lightweight and hardwearing Solar panel that performs extremely well in all conditions. Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. 140W-12V Mono 1250 x 668 x 30mm 25-Year limited warranty on power output and performance. 5-Year limited warranty on materials and workmanship. Sealed, waterproof, multi-functional junction box gives high level of safety. High performance bypass diodes minimize the power drop caused by shade. Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems. Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance. High power models with pre-wired quick-connect system with MC4 (PV-ST01) connectors. Solar Panel Mounting Brackets Use to Mount your Solar Panel to the Roof of a Vehicle or Boat Consists of 4 Moulded Corner Brackets Suitable for All Solar Panels from 20w to 360w Double Entry Solar Cable Roof Gland Double entry roof glands are included in the kit to enable easy safe installation.  

More information

Why it matters

Investing in a reliable solar battery charger kit is essential for anyone who relies on power in remote locations, such as campers, RV owners, and boaters. The Victron Smart 140W Solar Battery Charger Kit is designed to provide a sustainable energy solution, ensuring that your batteries remain charged and ready for use. This kit not only supports a variety of applications but also enhances the longevity of your batteries.

Features & benefits

Quick overview

• Includes a comprehensive solar power kit for various applications.
• Designed for easy installation in campervans, RVs, and boats.
• Features Bluetooth connectivity for remote monitoring.
• Supports both lead-acid and lithium batteries.
• Equipped with advanced MPPT technology for efficient energy harvesting.

Useful details

The Victron Smart 140W Solar Battery Charger Kit includes:

• Blue Power 230V UK Smart Charger (12V, 15A, IP65)
• Orion-Tr Smart DC-DC Charger (12V, 30A)
• SmartSolar MPPT 75/15 Charge Controller
• 140W Monocrystalline Solar Panel
• Various cables and connectors for installation
• 6-way Mega Fuse Board with fuses

Practical tips

When installing the Victron Smart 140W Solar Battery Charger Kit, consider the following:

• Ensure that the solar panel is mounted in a location that receives maximum sunlight exposure.
• Use the provided cable sizes to ensure optimal performance and safety.
• Regularly check the status of your battery through the Victron Connect app for peace of mind.
• Monitor the system’s performance, especially during cloudy days, to ensure efficient energy capture.

Key specifications

While specific technical specifications may vary, here are some key features of the components included in the kit:

• Blue Smart IP65 Charger: 15A output, Bluetooth connectivity, suitable for various vehicles.
• Orion-Tr Smart DC-DC Charger: 30A output, adaptive 3-stage charging, Bluetooth monitoring.
• SmartSolar MPPT 75/15: 15A maximum charge current, ultra-fast MPPT technology.
• Solar Panel: 140W output, lightweight, high-performance in low-light conditions.

Usage & maintenance

To ensure the longevity and efficiency of your Victron Smart 140W Solar Battery Charger Kit, follow these maintenance tips:

• Regularly clean the solar panel surface to maximize light absorption.
• Inspect all connections and cables for wear or damage.
• Keep the battery terminals clean and free from corrosion.
• Monitor the system using the Victron Connect app to track performance and battery health.

Frequently Asked Questions

1. Can I use this kit for both lead-acid and lithium batteries?

Yes, the Victron Smart 140W Solar Battery Charger Kit is compatible with both lead-acid and lithium batteries.

2. How do I monitor the battery status?

You can monitor the battery status remotely using the built-in Bluetooth feature and the Victron Connect app.

3. Is the solar panel waterproof?

Yes, the solar panel is designed with a sealed, waterproof junction box for safety and durability.

4. What is MPPT technology?

MPPT stands for Maximum Power Point Tracking, which optimizes the energy harvested from solar panels, ensuring maximum efficiency.

5. How do I install the solar panel?

The kit includes mounting brackets and cables for easy installation on roofs of vehicles or boats.